- Free Delivery*
- Free Colour Match
- 1 Hour Collect
- Bulk Purchase
*Please note – These are mixed colours, colour accuracy should be checked before application. No responsibility for colour differences can be accepted after use.
DC Paint Solutions are pleased to offer you our newest tried and tested product DC Chalk Board Paint. This paint comes in a 1 pack Jet Black Satin finish paint which you can apply to any wooden substrate, without the need of applying a primer. To apply, please clear any debris of the substrate and any chemical or oil based residues. Dry the substrate and then add two coats of the Chalk Board paint. Leave to cure for at least 1 hour at room temperature (please note: if the temperature is colder it may take longer to cure). Once the substrate is dry to the touch you are ready to use as you see fit. The cans will spray around 1 meter squared per can.
MUST NOT be applied around children
MUST apply in ventilated area
General industrial manufactured items.
Aluminium and its alloys, mama (zinc+aluminium+magnesium), brass: degreasing with 00695 silicone remover slow followed by blowing.
Spray – Mixing ratio:
LS945 2K GRIP BASE (derived from binder 29945) 1000 parts
29355 LECHSYS ACRITOP STANDARD HARDENER 100 parts
00825 (Standard) -00824 (Slow) LECHSYS UNIVERSAL THINNERS 500 parts
Pot life at 20°C : 4 hours
Spray viscosity at 20 °C: 16-18” DIN 4
Recommended spray temperature: above 5°C under 30°C
Ø Air cap: 1,2 mm
Air pressure: 3,5 Atm
N° of coats: 2-3
Recommended film thickness: 20-30 μ
Theoretical coverage: 1 kg of mixture = 7.3 mÇ at 25 μ
1 l of mixture = 6.7 mÇ at 25 μ
V.O.C. of the mixture ready for use: ~ 750 g/l
Air drying at 20°C :
Overcoatable with clearcoat after 20 min.
Acrylic industrial clearcoats for a two-coat process:
96390 ACRIFAN CLEAR COACH
96598 ACRIPLAST CLEAR SEMIOPACA
09852 CERAMIC CLEAR
31575 CLEAR SOFT MATT TH only on metallic and mica colours, NOT on solid colours.